Arcom ZyWAN Servisní příručka stáhnout pdf (Strana 37)

Configuring the Transportal Interlock Monitor

SM-1H1.0002, Rev. 1, July 2009 4-17

4. Browse to the directory containing the new “mlevents.txt” file on the left, and

“<root>/home/microlok” directory on the right. See Figure 4-13 for a typical screen

display.

Figure 4-13. Typical mlevents.txt File Transfer (Windows Computer)

5. Drag the new “mlevents.txt” file to the right (TIM) window. This overwrites the existing

mlevents.txt file in the TIM.

6. Close WinSCP.

7. Reboot the TIM to apply the changes.

4.3.2.2. Using a Linux Computer

For a Linux-based computer, transfer the mlevents.txt file to the TIM as follows:

1. From a computer on the same network as the TIM unit:

• Run “scp <source> <destination>” from the command line where:

<source> = full path to the new “mlevents.txt” file

<destination> = full path (including “root@ip_address”) to the TIM directory

• For example:

If the new “mlevents.txt” file is in the “/tmp” directory on the local computer and the

IP address of the TIM is 192.169.1.2, enter the following text in the command line:

“scp /tmp/mlevents.txt [email protected]/home/microlok/mlevents.txt”

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Žádné komentáře

Arcom ZyWAN Servisní příručka Strana 37